Fiber Media Converter
10/100/1000Base-Tx to 1000Base-Fx
The media converter transmits the transmission media of Ethernet signal from CAT Cable to optical fiber. It can extend the transmission distance up to 120km. Using media converter is an economical solution to achieve long distance transmission base on current status.
Features
* Max. 2M buffer memory built in chip.
* Auto negotiation back pressure flow control for full duplex IEEE802.3 X and half duplex.
* Automatic identification of MDI/MDI-X cross line
* High-performance1.4Gbps memory bandwidth.
* LED display for PWR,link/activity, full/half duplex,100M,1000M
* Forward 1600 bytes packet for management;
* max. transmission distance can be 120km;
Optional Features:
* Supports link fault pass through function (LFP);
* Supports for end fault function;
* Support EEPROM configuration;
* Pass all packets without address and CRC check;
* Forward fragments.
Standard
* IEEE 802.3 10 Base-T standard.
* IEEE 802.3u 100 Base-TX/FX standard.
* IEEE 802.3z 1000 Base-TX/FX standard.
* IEEE 802.3x Flow control standard.
Specification
|
Optical Specs. |
Fiber Port | 1port SC, FC/ST/LC optional |
| Fiber Type | Dual Fiber or BiDi | |
| Wavelength
& Distance |
Dual Fiber: Multimode 850nm 550m; 1310nm 2km
Single mode 1310nm, 1550nm from 10km to 120km BiDi: 1310/1550nm 2/10/20/40km; 1490/1550nm 60/80/100/120km |
|
|
Ethernet Specs. |
Cable | Twisted-pair |
| Transmission Type | 10/100/1000Mbps Full Duplex/Half Duplex | |
| Distance | 100meter | |
| BER | ＜1E-9 | |
| Data Buffer | 2M | |
| Power | 4w | |
| Power Temp. Variation | 0.2mw /℃ | |
| Operate Temp. | 0~70℃ | |
| Storage Temp. | -40~85℃ | |
| Humidity | 95% non-condensing | |
| Power Supply | AC100~240V -50/60Hz +5V DC, 12VDC(optional) | |
| Weight | 0.4KG | |
| Dimension | External power | 95x70x26mm |
| Internal power | 140x110x30mm | |
LED Indicator Description
| LED | STATUS | |
| PWR | ON | Power ON |
| OFF | Power OFF | |
| FDX | ON | Full Duplex |
| OFF | Half Duplex | |
| 100M | ON | 100M Speed |
| OFF | Failed | |
| 1000M | ON | 1000M Speed |
| OFF | Failed | |
| 100M-LINK/ACT | ON | Linked on UTP Port |
| FLASH | Activity | |
| OFF | Not Linked | |
| 1000M-LINK/ACT | ON | Linked on Fiber Port |
| FLASH | Activity | |
| OFF | Not Linked | |
Reviews
There are no reviews yet.