Fiber Media Converter
10/100Base-Tx to 100Base-Fx
The media converter transmits the transmission media of Ethernet signal from CAT Cable to optical fiber. It can extend the transmission distance up to 120km. Using media converter is an economical solution to achieve long distance transmission base on current status.
Features
* Supports 100Base-FX standard;
* Supports auto MDI-MDIX function;
* LED display for link/activity, full/half duplex, 10/100M
* Supports modified cut-through frame forwarding for low latency;
* Supports pure converter mode data forwarding for extreme low latency;
* Supports flow control for full and halt duplex operation;
* Bandwidth control;
* Forward 1600 bytes packet for management;
* max. transmission distance can be 120km;
* SC(default)/FC/ST supported.
Optional Features:
* Supports link fault pass through function (LFP);
* Supports for end fault function;
* Support EEPROM configuration;
* Pass all packets without address and CRC check;
* Forward fragments.
Standard
* IEEE802.3 ETHERNET STANDARD
* IEEE802.3u FAST ETHERNET STANDARD
* IEEE802.3x FLOW CONTROL STANDARD
* IEEE802.3ab FRAME SIZE STANDARD
Specification
|
Optical Specs. |
Fiber Port | 1port SC, FC/ST/LC optional |
| Fiber Type | Dual Fiber or BiDi | |
| Wavelength
& Distance |
Dual Fiber: Multimode 1310nm 2km
Single mode 1310nm, 1550nm from 10km to 120km BiDi: 1310/1550nm 2/10/20/40km; 1490/1550nm 60/80/100/120km |
|
|
Ethernet Specs. |
Cable | Twisted-pair |
| Transmission Type | 10/100Mbps Full Duplex/Half Duplex | |
| Distance | 100meter | |
| BER | ＜1E-9 | |
| Data Buffer | 1024kb | |
| Power | 2.5w | |
| Power Temp. Variation | 0.2mw /℃ | |
| Operate Temp. | 0~70℃ | |
| Storage Temp. | -40~85℃ | |
| Humidity | 95% non-condensing | |
| Power Supply | AC100~240V -50/60Hz +5V DC, -48VDC(optional) | |
| Weight | 0.4KG | |
| Dimension | External power | 95x70x26mm |
LED Indicator Description
| LED | STATUS | |
| PWR | ON | Power ON |
| OFF | Power OFF | |
| FDX | ON | Full Duplex |
| OFF | Half Duplex | |
| FX | ON | Transmit Fiber Optical Signal |
| OFF | No Fiber Optical Signal | |
| TX | ON | 100Base-TX |
| OFF | No Ethernet Signal | |
| TX-LINK/ACT | ON | Linked on UTP Port |
| FLASH | Activity | |
| OFF | Not Linked | |
| FX-LINK/ACT | ON | Linked on Fiber Port |
| FLASH | Activity | |
| OFF | Not Linked | |
Reviews
There are no reviews yet.